1.Flexible Connector-An elastomeric expansion joint is a specially designed section of pipe inserted within a rigid piping system to provide flexibility .
2.Stress Relief - Pipe stress caused by thermal expansion/contraction or foundation settlement can be handled by expansion joints.
3.Minor Misalignment - Standard expansion joints can withstand a minimal amount of existing lateral, torsional, angular or concurrent misalignment. Contact the manufacturer for specifics .
4.Isolate/Reduce Vibration - Oscillating movement around the axis of the expansion joint can be effectively dampened, eliminating the transmission of this vibration - preventing equipment damage/failure .
5.Dampen Sound Transmission - Using rubber flanges, expansion joints can lower the transmission of undesirable noises .
6.Multiple Arch Type - Expansion joints with up to four arches may be manufactured to handle greater movements than a single arch . The movement capa-bility of a multiple arch expansion joint is typically that of a single arch type multiplied by the number of arches . (See Figures 1, 2 & Table I)
7. Natural/Synthetic Elastomer - A wide variety of elastomers are available to meet specific demands of industrial applications .
8.Fabric/Metal Reinforced - The strength in an elastomeric expansion joint is derived from design features, combined with rubber impregnated layers of fabric and internal metal reinforcement . (See Figures 1 & 2)
9.Fabric Reinforcement - In these styles, wide flowing arch (Figure 3) and U-type (Figure 4), fabric is used to effectively handle design parameters outlined.
10.Resistance To Corrosive Media - Special elas-tomeric liners and covers may be utilized to pro-long life of the expansion joint when corrosives are present .
11. Resistance To Abrasive Media - Abrasive media may be handled more effectively if a special tube/liner is used; ie: gum rubber, increasing thick ness of layers (rubber), steel flow liner, etc .
12. Temperature Capability - Depending on the elastomer selected, elastomeric expansion joints can handle a range of -40°F (-40°C) to 400°F (205°C) .
Our Advantages: